Your search for scanning electron microscopy resulted in 12 matches...
The study presents the results of examinations carried out on ultra-light magnesium- and lithiumbased alloys of two-phase α-β structure and monophase β structure using scanning electron microscopy w...
more >>
The study describes the attempts to use a mechanochemical synthesis in the fabrication of composites based on Cu-Al intermetallic compounds reinforced with homogeneously distributed ceramic Al2O3...
more >>
The aim of this study was to determine the effect of temperature and Zn content on the solderability of Cu substrates with liquid Sn-xZn alloys (4.5; 90; 95 wt.% Zn). Solderability tests were carried out by the wetting balance test which allows th...
more >>
The aim of this study was to determine the effect of temperature and zinc content on the solderability of nickel substrates with liquid Sn-xZn alloys (4.5, 90, 95 wt% Zn). Solderability tests were carried out by the wetting balance method which al...
more >>
The aim of this study was to determine the impact of technological factors (surface treatment and contact time) on the kinetics of wetting of nickel substrates by a liquid aluminum alloy. Wetting kinetics studies were carried out in vacuum at 700&...
more >>
The paper presents results of preliminary studies on Ag-C materials obtained using the powder metallurgy (PM) method with carbon nanotube doping. Based on structural tests performed using scanning electron microscopy a...
more >>
The aim of this study was to determine the effect of the chemical composition of Ni-P coating on the wettability kinetics of SAC305 liquid solder in contact with the Ni-P coating. The study was conducted in vacuum, at 230°C, for 5 minutes, usi...
more >>
The studies of the drop-size effect on the wetting kinetics of the nickel substrate by lead-free solder were performed by the sessile drop method in a vacuum at a temperature of 260°C.In this work, Sn-based alloy SAC305 (Ag - 3.0 wt. %, ...
more >>
Studies of composite materials of the Cu-C type with additives of different forms of carbon (carbon nanopowder, carbon nanotubes and reduced graphene oxide) were performed by the powder metallurgy method. Based on the structural tests conducted by...
more >>
The article presents the results of surface morphology of dust from dry dedusting of moulding sand with bentonite and mixtures of bentonite with lustrous carbon carrier using scanning electron microscopy. The study identifies the approxi...
more >>
In this work, FEI SciosTM field emission gun scanning electron microscope (FEG SEM) equipped with a unique combination of analytical and imaging detectors was utilized to examine structure and chemistry of selected Si/refractory couples...
more >>
The wetting behavior and reactivity between molten cast iron (originally vermicular graphite cast iron, containing in wt. %: 3.70 C, 2.30 Si, 0.44 Mn, 0.054 P, 0.017 Mg, 0.015 S) and commercial polycrystalline alumina (Al2O3 ...
more >>
|